A helical wall anchor stabilizes bowed or cracked foundation walls caused by soil expansion and lateral pressure. The system uses steel helical screws drilled into stable soil layers beyond the failure zone to realign and permanently support compromised walls. Components include helical lead sections, extension rods, and wall plates or channels, all made from hot-dip galvanized steel for durability in corrosive soil environments.
Helical wall anchors are available in shaft diameters from 1-1/2 inches to 3-1/2 inches, with helix plate diameters ranging from 8 inches to 14 inches. Depending on soil properties and configuration, capacities can reach up to 200,000 pounds per anchor. This versatility allows the system to address varying degrees of foundation damage and soil conditions.
Installation involves drilling holes at designated wall points, inserting the helical lead at an angle, adding extensions as needed, and securing the assembly with a steel plate or channel. The plate transfers load immediately, allowing for real-time testing and adjustment. Most installations are completed within a few days with minimal site disruption, as work occurs primarily externally without major excavation.
Compared to full wall replacement, helical wall anchors offer permanent correction at lower cost and shorter timelines. They are used in retaining walls, bulkheads, seawalls, and foundation shoring where lateral reinforcement is required.
Helical Wall Anchor Manufacturer for Enhanced Foundation Solutions
RaxPower is a leading helical pier manufacturer, with over 21 years of experience specializing in helical wall anchors.
Our patented helical pier systems are designed to install faster, perform stronger, and last longer—in any soil, any terrain, anywhere. Using sophisticated hot forging technology, we produce the strongest piles for soil stabilization and foundation repair, resulting in greater strength and accurate sizing.
Our manufacturing in Hebei Province, China, employs automatic machines and strict quality control, including raw material selection, multi-stage testing, and hot-dip galvanizing per ISO standards.
All products undergo load tests and have passed SGS and authoritative institute verifications, ensuring guaranteed stability.
The Helical Wall Anchor offers the following benefits:
- Ease of installation
- Little to no vibration
- Immediate load transfer
- Minimal jobsite disturbance
It is suitable for residential, commercial, and industrial applications.
Contact us to become a member of our nationwide network of partner contractors.
| Shaft Size | Shaft Type | Installation Torque Factor (k) | Axial Compression Load Limit (lb) | Ultimate Tension Strength (lb) | Useable Torsional Strength (ft-lb) | Practical Load Limit (lb) |
|---|---|---|---|---|---|---|
| 1-1/2″ | Square Bar | 9-11 | 70,000 | 70,000 | 7,500 | Load limited to attachments |
| 1-3/4″ | Square Bar | 9-11 | 100,000 | 100,000 | 10,000 | – |
| 2″ | Square Bar | 10-12 | 200,000 | 200,000 | 23,000 | – |
| 2-7/8″ | Tubular | 8-9 | 100,000 | 100,000 | 9,500 | 80,000 |
| 3-1/2″ | Tubular | 7-8 | 115,000 | 120,000 | 13,000 | 97,000 |
Frequently Asked Questions（FAQS）
What is a helical wall anchor and how does it work?
A helical wall anchor uses large steel screws, or helicals, drilled into stable soil to realign and support damaged foundation walls. It pulls the wall back into place and keeps it secure, preventing further bowing or cracking caused by soil pressure.
What are the benefits of using helical wall anchors over wall replacement?
Helical wall anchors offer a permanent solution that corrects bowing walls, with shorter completion time (usually less than three days), cost-effectiveness, and limited disruption since most work is done outside. This makes them more affordable and less invasive than full wall replacement.
How is the helical wall anchor system installed?
Installation involves drilling holes on the interior wall, inserting the lead helix into the soil outside the foundation, connecting it to an extension rod, and rotating it at an angle until it reaches the required torque. A wall plate or steel C-channel is then securely fastened to the anchor from the inside.
What materials ensure the durability of helical wall anchors in harsh conditions?
All components are constructed from high-quality steel and hot-dip galvanized with a mean coating thickness exceeding 85 microns, providing excellent corrosion resistance and increased product life in aggressive soils, demanding environments, and coastal installations.
Are your helical wall anchors certified and compliant with industry standards?
Yes, our helical wall anchor systems have passed SGS tests and tests by authoritative research institutes, ensuring they meet the highest quality and safety standards for applications like grid maintenance, railway electrification, and critical infrastructure where compliance is paramount.
What warranty and support options are available with helical wall anchors?
RaxPower's helical wall anchor system is backed by an industry-leading warranty, offering peace of mind with professional service, tailored plans, and a commitment to your home's safety and stability. All work is performed by experts dedicated to customer satisfaction.
Get A Quick Quotation Today
